Versatile accent table features an open latticework base, crowned with an octagonal top. Wood construction, with black ebonized finish. Fully assembled.15.25"diam x 24"h.
|


We chose a rich coffee-brown background and bright-white panels for a dramatic contrast. This 1 3/8" astragal molding has a graphic, modern appearance, but molding of almost any size and profile will work.
Our total cost (including paint, materials and four molding panels): about $200
Measure the walls. Determine the number of panels you want and how many inches will surround each one.
Note: It's all about proportions. Once you know your dimensions, order precut mitered pieces (ends cut at 45° angles) of molding (two vertical, two horizontal) for each panel.
If painting first, prime walls and follow with at least two coats of paint. Apply primer and one coat of paint to molding pieces, leaving mitered ends bare. The first piece to go up should be the vertical one closest to the room's corner. Use a level to establish a straight line at your chosen distance. Dab construction adhesive along the center of the molding and press it to the wall, using your line as an outside mark. Hammer 1½" brads (aka finishing nails) partway through the molding's thickest point, then countersink them.
Repeat the above process for the panel's bottom edge. Make sure you keep mitered ends tightly abutted. Then adhere the last two pieces simultaneously (requires a helping hand). If the rectangle looks straight, tack the other molding pieces in place with brads. Countersink nails and fill divots with vinyl spackling compound. Continue with remaining panels.
When panels are secure, seal boxes' inner and outer edges with light-duty painter's tape. Lightly sand molding to remove globs of spackling compound. With a 1" brush, sparingly apply a final coat of paint to the molding.


"My favorite thrifty trick is to slice reasonably priced 1' marble tiles into thirds and create a bordered running bond pattern (see page 132) on a kitchen floor. So elegant and simple."—Suzanne Rheinstein


Color Schemes – 5
Vertical Repeat – 25 1/4" / 64cm
Horizontal Repeat – 27" / 69cm
Width – 54" / 137cm
| |

| X-Bench |
| $700.00 |
| You would be mad not to have two X-Benches under a console or opposite your sofa. Our X-Benches are an absolutely essential finishing touch. This fully upholstered cushion bench has self welting and legs that criss-cross. We now offer C.O.M. on all upholstered furniture. Provide us with your own fabric and add a dash of personal panache to our fab furniture. Please call us at 1-877-287-1910 for order information |
| • Shown in Key Black (grade 3) • 21" wide x 21" deep x 20" high |



